# Purfling Cutter

Hewn Tool Library · https://hewn.build/tools/purfling-cutter

Corrected: An independent reviewer read this entry and found corrections. They have been applied to the text, and the reviewer re-checked the correction that mattered most for safety and found it done; the others have not been re-checked yet. The list at the end is the record of what changed.

Cite as: "Purfling Cutter." Hewn Tool Library, hewn.build/tools/purfling-cutter. Reviewed 2026-09-10.

---

## Identity

- **Core definition — a family, not one product.** A purfling cutter or marker is a fence-guided luthiery hand tool that carries **one or two small, adjustable knives** at a set offset from an instrument's edge, used to scribe and/or deepen the wall lines of a purfling or binding channel just inside a curved plate edge. Some paired-knife products can establish both walls in one pass, but that is not the same as producing an empty channel: a knife and a purfling pick or narrow chisel then complete the depth, clear the waste between the walls, and cut the corner mitres. The tool's advantage is repeatable edge offset on a curved plate, provided the fence stays fully and continuously registered (tangent) against the edge. The twin-removable-knife Ibex is a prominent modern subtype, not the definition. — Synthesis of StewMac (read), Dictum and cremonatools.com product documentation (carried), and the mark, knife, pick sequence in makingtheviolin.com (read this pass).
- **A real terminology split, not a settled boundary.** Some sources reserve "purfling **marker**" for a tool that only scores guide lines, with a knife or chisel doing the deepening, and "purfling **cutter**" for a tool sold for deeper cutting. Retail objects under both names (Ibex, Herdim, Dictum) overlap, but the process distinction is useful and is kept: a fence-guided tool scores or deepens one or two boundary lines; a separate knife may deepen further; a pick or narrow chisel removes the center waste. The makingtheviolin.com page lists a "purfling marker: a single or double edge marker" as the first of its four tools, then a cutting knife, a smaller knife for tight curves and the bee-sting corners, and a purfling pick that removes the waste. — Christopher Martyn on Brian Hart's shop-made tool (finelystrung.com, carried); Vojtech Blahout (makingtheviolin.com, read).
- **Distinct from the [[the reviewer Processed Originals/Scratch Stock|Scratch Stock]].** A scratch stock is a shop-made scraper-profile tool that luthiers offer as a DIY substitute for the same task; the purpose-built tool has an adjustable fence and blade geometry the scratch stock lacks.
- **Family/category.** A specialty luthiery marking-and-cutting tool, sibling to the [[the reviewer Processed Originals/Marking Gauge|marking-gauge]] family in mechanism (fence + adjustable blade spacing) but built for a curved instrument edge; a companion to the [[Violin Maker's Plane|Violin Maker's Plane]] in a luthier's edge-work kit. **Violin purfling channels and guitar binding rabbets differ:** a single knife can lay out a binding boundary, but a hand cutter does not necessarily remove the whole rabbet; router-and-bearing systems are an alternative for excavation and repeatability, not a production-scale version of the same cutting action.

## How NOT to use it (the heaviest section)

**not-for**
- Cutting the purfling or binding strip itself: this tool cuts the channel in the instrument's own plate wood. The confusion is inferred from how consistently sources clarify the distinction; no first-person account of the mistake was located.
- Production-scale guitar binding, where router-and-bearing systems (e.g. [StewMac LMI binding router bit and bearing sets](https://www.stewmac.com/luthier-tools-and-supplies/types-of-tools/routers-and-bits/bits/lmi-binding-router-bit-and-bearing-sets/) and similar) exist for repeatable excavation.

**dangerous**
- **Personal injury is a foreseeable hazard of the tool, whatever anecdotes exist.** Exposed, removable, very sharp knives create a laceration and puncture hazard while cutting, adjusting, sharpening, transporting, storing and changing blades. HSE (hand knives, read this pass): such injuries "usually happen when the knife slips during cutting or trimming," and the blade usually cuts the other hand or fingers; it also describes exposed blades carried or left on work surfaces injuring users and others. CCOHS (sharp blades, read this pass): lacerations and punctures are the most common concern, "dull blades require more force, increasing the chance of injury," and the guidance is to cut away from the body and keep all body parts out of the cutting path and the path a slipping blade might take. (Both are general hand-knife and sharp-blade guidance applied here to this tool's blade geometry, not tool-specific injury records. No tool-specific injury account was located, which is a research result and is not a risk assessment.)
- **Controls.** Secure and support the plate so it cannot move under the stroke (HSE: stable work; a clamped or supported plate is the equivalent for this tool). Keep the free hand outside the blade path and the path a slip would take. Arrange the stroke away from the body where the geometry of a curved edge permits. Use light, progressive passes rather than force; keep knives sharp, since dull blades need more force. Stop before repositioning or checking the cut. Cover or box the blades in storage; do not leave the tool with exposed blades on the bench or carry it loose (HSE: storage in boxes or sheaths near the workstation, no carrying exposed knives). Handle blade changes deliberately, with the tool set down and the blades controlled; worn or broken blades go in a puncture-resistant container (CCOHS).
- **Gloves are task-specific, not a default.** CCOHS suggests cut-resistant or mesh gloves "especially for the holding hand"; HSE says to select gloves for the task and size them carefully. Around a precision knife, a glove can reduce dexterity and introduce a different hazard, so gloves, if used at all, need a task-specific assessment, not a generic instruction. Goggles or glasses are advised by CCOHS in case a blade shatters.
- **Workpiece damage is a separate, high-cost risk,** covered under damaging. A slipped cut can cost the plate and cut the hand holding it; the two are not collapsed into one line.

**damaging**
- **Loss of offset and plate damage.** Wilson: "a slip would ruin the top or back, which has already been carved out" (on a violin in the sequence he describes). Poor fence contact, tear-out from grain direction or excessive first-pass pressure, chipped inner corners, and scars while deepening or picking all belong here.
- **Historical flaws.** Hargrave's account of chipped mitres, scarred backs and cracked corners across ten del Gesù violins shows channel flaws occur even in celebrated work.
- **The paired-blade-specific trade-off.** Hinsberger (via *The Strad*): a well-executed double-cutter pass "can look too good, owing to its uniform width"; mistakes come easily on the front where the rings are parallel, and he prefers a single cutter for finer control of the line spacing and because a mistake can be avoided on the second cut.
- **Losing tangency on tight curves.** Wilson's critique that a wide, blocky body is harder to keep tangent on extreme curves such as a violin's.

**beginner-trap**
- **Over-deep first pass, especially on spruce** (makingtheviolin.com: "go very lightly").
- **Corner mitres treated as an extension of the straight run.** makingtheviolin.com warns that the inner corner tips chip easily and uses a smaller knife for the tight curves and bee-sting corners.
- **Treating one product's numbers as the family's** (.085", 2.5–12 mm).

**lineage-misuse**
- Choosing a cutter for the tightest violin curves without checking body width and tangency (Wilson's critique).
- Substituting a [[the reviewer Processed Originals/Scratch Stock|Scratch Stock]] without recognizing it has no adjustable fence or spacing.

## Correct use

**Genuinely good at:** laying out and starting a repeatable wall line (or pair of lines) just inside a curved instrument edge, on a plate whose edge is prepared and can hold a constant fence reference. The tool normally does not remove the strip of waste between the walls; a knife and a purfling pick or narrow chisel complete the channel, with corners handled separately.

**Setup is operational, not generic.** Knife spacing must be matched to the actual purfling or binding strip in hand, not assumed from any product's stated figure. Fence offset must be set to the planned edge margin for the specific instrument and build. Blade projection must be set to the plate's actual thickness and the maker's chosen construction sequence. **A test cut on comparable scrap, or a sacrificial setup piece matched to the real plate's thickness and curvature, is required before the fence touches the instrument.** Use the actual purfling strip as the setup gauge.

**Which build stage this tool suits.** Different construction sequences put purfling before or after final edge fluting or graduation, and this entry does not assume one. George Wilson's remark that a slip ruins a top or back "which has already been carved out" describes the violin sequence he has in mind; other makers' sequences differ. Whatever the sequence, the tool needs a **prepared plate edge that holds a stable, constant reference surface for the fence**; a rough or unformed edge will not let the fence register tangentially. Follow the chosen construction sequence rather than treating the tool as suited to "any project stage."

**The core technique, as one maker sequences it.** makingtheviolin.com (read this pass): cut the channel about 2 mm deep, assuming plate edges a little over 4 mm thick, with controlled cuts going no deeper; later fluting reduces the depth to about 1 mm. **These figures describe that violin build only; they are not a depth spec for the tool or family.** Same source on grain: when marking spruce, "go very lightly," because the blades can be pulled off line by the grain; hold the marker at a constant, perpendicular angle; use light strokes first, then heavier ones, and avoid undercutting. Corners: the inner tips chip easily, especially in spruce, so "be extremely careful"; a smaller knife is used for the tight curves and bee-sting corners. The tool is kept exactly tangent to the edge throughout the stroke, per Wilson. **Workflow** per makingtheviolin.com: mark the parallel guide lines, deepen with a knife as needed, clear waste with a separate purfling pick; the corners get their own warning and a smaller knife (above).

## Matching (the workbench's first read)

- **Does:** lays out and/or cuts one or both walls of a purfling channel at a set, repeatable distance from a prepared instrument-plate edge; may also mark the inner boundary of a binding rabbet when used with one knife. Paired-knife products can establish both walls together, but excavating the waste and cutting corner mitres remain separate knife and pick steps.
- **Suits:** violin-family and guitar-family plates with a prepared, stable edge, matched to the maker's own construction sequence. Suitability depends more on instrument geometry, grain, plate support and knife condition than on a species list; cite the manufacturer's stated scope or documented practice for the instrument family rather than assuming a wood roster.
- **Pairs with:** a knife for deepening and corners, a purfling pick or narrow chisel for waste removal, actual purfling as the setup gauge, and plate holding and support suited to the build stage.
- **Substitutes for:** divider-and-knife or shop-made fence-guided marking arrangements for laying out the walls; only partially substitutes for freehand knife work because excavation and corners remain.
- **Cannot substitute for:** a purfling pick or chisel, a corner knife, or a router-based system when the task is to excavate a complete binding rabbet efficiently.
- **Not for:** cutting the inlay strip itself; forcing full depth in one pass; carrying a double cutter through corners; assuming a generic .085" (or any other single product) width for non-matching purfling; referencing an irregular or unfinished edge that cannot hold a constant offset.
- **Access:** skill-sensitive, with potentially expensive workpiece failure and ordinary sharp-tool injury risk. A beginner can use it under supervision after setting and proving width, offset and depth on scrap, learning the grain-aware sequence, securing the plate and practicing tangent control; what competence changes is the likelihood of slips and workpiece loss, not the presence of an exposed blade.
- **Restoration / continuity of use (formerly "Revival"):** the record documents use of this class of tool across at least two bounded periods, a museum object associated with a Ceruti-workshop collection and current commercial production and practice (named practitioners Wilson, Hargrave, Hinsberger and Hai discuss it in current terms), without a demonstrated chain between them. This is not evidence of a revival or of an unbroken tradition.

## Anatomy

**Subtype-first: the family shares a mechanism; the numbers are product-specific.**

- **Fence.** Registers against the instrument's edge and sets the offset of the cut as the tool is drawn around the curve. It controls offset only while it remains fully and consistently registered against a suitable edge. It does not by itself control width or depth.
- **Knives.** One or two, adjustable or fixed-pair depending on product. Width depends on knife setting or a fixed paired-blade geometry; effective depth depends on blade projection, pressure, pass count, grain and the reference surface. "Controlled" means adjustable and repeatable after setup, not self-guaranteeing.
- **Ibex (USA).** See Lineage. The .085" width and 0"–1/4" offset belong to this one product, not to the family.
- **Dictum / Herdim products.** 702522 (brass body, twin 0.6 mm HSS blades, ambidextrous) and 717110 (twin parallel blades; spacing range `[manual, relayed]` from Run 653 and uncorroborated by the reviewer). Two distinct products, not one spec under two names.
- **A named ergonomic critique.** Brian Hart's shop-made variant (via Christopher Martyn, carried) puts the handle and center of gravity below the blades, calling out "the usual design of purfling marker, which has the handle on top."

## Variations (living)

| Variant | What differs | Source |
|---|---|---|
| Ibex Purfling Cutter (USA; Sloane design is a retailer attribution) | Cast bronze, twin removable steel knives, Allen-adjustable, .085" combined width with both engaged, 0"–1/4" from edge, one knife usable alone for a binding slot | StewMac (read this pass); Diefenbacher (carried) |
| Dictum / Herdim Purfling Channel Cutter, 702522 | Brass body, twin 0.6 mm HSS blades, ambidextrous | the reviewer's catalogue check; Dictum and cremonatools.com (carried) |
| Dictum Purfling Cutter, 717110 | Twin parallel blades; stated 2.5–12 mm spacing is provisional | Dictum (not readable this pass) `[manual, relayed]` |
| Museo del Violino MS680 (Ceruti-workshop attribution) | Walnut and metal, single adjustable blade per the object title; an earlier or different configuration, not evidence the twin-blade form is old | Google Arts & Culture (read this pass) |
| Shop-made purfling marker (Brian Hart) | Handle below the blades | finelystrung.com (carried) |
| [[The reviewer Processed Originals/Scratch Stock\|Scratch Stock]] (DIY substitute) | Shop-made scraper-profile tool; no adjustable fence or spacing | Scratch Stock entry (this corpus) |

**Gap.** Whether MS680's single blade means the Ceruti-workshop example predates the twin-blade convention or reflects a different single-blade tradition is not resolved by any source located.

## Trades (where it appears)

Violin-family lutherie (violin, viola, cello, double bass, viola da gamba); guitar-family lutherie (steel-string and classical guitar, mandolin) as a later, adopted application per Mineau's account. No use outside string-instrument making was located in the searches described.

## Lineage

**The technique is older than any dedicated tool located.** Purfling as a technique is associated with Andrea Amati's 1564 violin (Ashmolean Museum, Oxford). The Ashmolean's collection page (read this pass) says only that the collection includes "the earliest dated violin, made by Andrea Amati in 1564"; it says nothing about purfling or other materials. The pearwood/poplar laminated-strip construction and any "crack-arresting" function rest on Wikipedia, "Purfling," citing Toby Faber, *Stradivari's Genius* (2004), a tertiary source; they are **provisional** until an object-specific or conservation source is found. This review located no evidence for an early dedicated tool or method; it does not conclude that early purfling was freehand.

**A museum-attributed object, with a correction to a common online label.** The Museo del Violino, Cremona, holds object **MS680**. The object page (read this pass) gives: title "Purfling cutter with adjustable blade"; creator field "Antonio Stradivari"; attribution "Ceruti workshop"; material walnut (*Juglans regia* L.) and metal; dimensions "LN 165 mm; LR max. 30.9 mm"; inventory number MS680. — [Museo del Violino, object MS680](https://artsandculture.google.com/asset/purfling-cutter-with-adjustable-blade-antonio-stradivari/FgHDmuYtGioEpQ?hl=en). Because the page's creator field names Stradivari while its attribution field names the Ceruti workshop, the object is popularly called "Stradivari's purfling cutter" but is not shown to be his. The museum's collection story (read this pass) describes two donations: Stradivari-workshop items from Count Cozio's collection, donated by Giuseppe Fiorini in 1930, and a separate lot from "Enrico Ceruti's workshop," donated by violinist Giovanni Battista Cerani in 1893. — [Museo del Violino, "Antonio Stradivari" collection story](https://artsandculture.google.com/story/antonio-stradivari-museo-del-violino/3AXRy3cqgrYpJw?hl=en). That the object belongs to the Ceruti lot is inferred from the attribution field and the two-lot structure; the object page read does not state the lot or a century, and the "19th-century" dating carried from Run 653 is provisional. A photographic survey of Stradivari's surviving tools (Kevin Lee, kevinleeluthier.com/stradivari_tools, carried) includes no labeled purfling cutter, which is consistent with, not proof of, his using a knife. **MS680's title says "blade," singular.** It shows an adjustable purfling cutter associated with a Cremonese violin-making collection; it cannot by itself establish a technical lineage to the modern Ibex form, especially if it has one blade rather than two.

**Modern manufactured examples — distinct current product lines, with the chain from MS680 to them unverified.**
- **Ibex (USA).** Twin removable knives, Allen-screw adjustment horizontally and vertically, cast bronze body with a hardwood handle. StewMac (read this pass): using both blades cuts a ".085"-wide purfling channel"; it cuts "from 0" to 1/4" in from the instrument's edge"; one blade cuts a slot for edge binding; replacement blades sold separately. StewMac states the tool was "designed by pioneering luthier Irving Sloane." — [StewMac, Ibex Purfling Cutter](https://www.stewmac.com/luthier-tools-and-supplies/types-of-tools/chisels-and-knives/ibex-purfling-cutter/). **The Sloane design is a retailer attribution** (corroborated informally by George Wilson's forum recollection, which is not design documentation). The same physical object appears at [Diefenbacher Tools, "Purfling Groove Marker"](https://diefenbacher.com/product/purfling-groove-marker/) ("Made in USA by Ibex," 1/16"–1/4" clearance; carried, not re-read). Sloane's obituary by Roger Sadowsky (*American Lutherie* #55, 1998, cited in the [[Violin Maker's Plane|Violin Maker's Plane]] entry) lists his tool designs ("violin finger planes, bridge clamp, fretting rule, bending iron, rosette cutter, thickness gauge, and crack-splicing set") without naming the purfling cutter, so the retailer attribution is not corroborated by the strongest biographical source located.
- **Herdim / Dick (Germany).** Founded by Johann Friedrich Dick in Markneukirchen, branded HERDIM by his son Heinrich Hermann in the early 20th century, relocated to Metten, Bavaria in 1948, now under the DICTUM brand (Dictum "Company History," [link](https://www.dictum.com/en/company/company-history/), carried). **Product 702522** (brass body, twin 0.6 mm HSS blades, left/right-hand use): [Dictum 702522](https://www.dictum.com/en/purfling-channel-cutter/702522) and [cremonatools.com](https://www.cremonatools.com/purfling-channel-cutter.html). The reviewer's check of the DICTUM catalogue confirmed a brass-bodied, two-blade purfling-channel cutter with 0.6 mm HSS blades. **Product 717110:** Run 653 recorded "adjustable outside spacing of 2.5–12 mm" from [Dictum 717110](https://www.dictum.com/en/purfling-cutter/717110). The reviewer's catalogue check **did not corroborate** the 2.5–12 mm figure and instructs that it not be generalized until tied to the exact product and catalogue line; the Dictum pages could not be fetched in this pass. The figure is therefore `[manual, relayed]` from Run 653 and provisional.

**Contemporaries.** The [[the reviewer Processed Originals/Scratch Stock|Scratch Stock]] and the purfling **pick** are working companions, not ancestors or descendants.

## History (Petroski "form follows failure" lens)

No source located across Runs 531 and 653 explains why the dedicated adjustable-knife tool emerged when it did. One plausible mechanism, **Haft's own inference, not a sourced claim:** a fence-guided adjustable knife removes two variables that make freehand channel work failure-prone, inconsistent depth and inconsistent distance from the edge.

**Patent and catalogue searches, stated with their scope.** Run 531's Google Patents queries ("purfling cutter," "purfling tool," "binding channel cutter," "purfling gauge," plus a 1900–1950 cutting-tool sweep) found no relevant patent for a purfling-cutter mechanism in the searches described; the only "purfling" patents surfaced (US 8,871,321; US 10,964,296) describe unrelated manufacturing methods. Run 653 reports a direct DATAMP query returning no purfling-specific patent, only unrelated marking-gauge and divider patents; that query was not re-run in this pass. These are search results, not proof of nonexistence. No design patent or trademark filing was found in those searches for the Sloane/Ibex design; trademark databases were not systematically searched.

## Human Side

*Forum, blog and trade-press material below is carried from Runs 531 and 653 and not re-read in this pass; it is practitioner opinion and observation, and the comment-level claims are not consensus.*

**George Wilson** — described in this corpus as Colonial Williamsburg's longtime master instrument maker (see [[Violin Maker's Plane|Violin Maker's Plane]]) — on a Sawmill Creek thread ("Purfling cutter," started by Randy Walton, Dec 29–31, 2010): *"The purfling tool must be turned as it is pulled around the curved edges of an instrument, so that the cutter is always exactly tangent to the edge, to insure that the cutter makes its cuts the same distance from the edge everywhere. This is especially critical on the violin, since a slip would ruin the top or back, which has already been carved out, and a lot of effort put into it thus far."* — [sawmillcreek.org/threads/purfling-cutter.155827/](https://www.sawmillcreek.org/threads/purfling-cutter.155827/). Wilson also wrote of the Ibex: *"That is the old tool designed by Irving Sloane... I don't think it is flimsy, but see no need for it to be so WIDE and blocky. Being so wide might make it more difficult to keep the cutter tangent to extreme curves, like on a violin."* This is his own opinion, and informal corroboration of the Sloane attribution only.

**Christophe Mineau** (French luthier, La Belle Note) posted a shop-made purfling cutter in the same thread, noting it "works for violin makers as well as mandolin or guitar makers" (2014, via homemadetools.net): cross-trade use within the string-instrument family.

**Hargrave on historical channel flaws.** Roger Hargrave's descriptions of ten Guarneri del Gesù violins, reproduced by commenter Luis Claudio Manfio (24 Apr 2012) under Jonathan Hai's violinist.com post "Violin Maker's Wife: Purfling Part II" ([violinist.com/blog/yonhai/20124/13415](https://www.violinist.com/blog/yonhai/20124/13415), read 2026-10-16), Manfio stating "The above descriptions are by Roger Hargrave": *"the innermost point within the mitre has chipped away during the excavation of the channel"* (Violin 1, Joachim, 1737); *"the downward knive stroke wich formed it has scarred deeply into the back"* (Violin 3, Heifetz, 1740, spelling as posted); corners *"formed by a series of cracks"* (Violin 4, Vieuxtemps, 1741). Hargrave's own publication was not read; this is one expert's examination as reproduced in a comment, evidence that channel flaws occur in celebrated work.

**A later-step comment, not a channel-cutting rule.** On the same post, commenter John Cadd (25 Apr 2012) is discussing the fluting done *after* the purfling is installed, with a gouge working across its inner and outer sides: *"the outer edge , which must be preserved ,"* *"is being cut in the wrong direction."* *"Two different grain directions are presented to the edge of the gouge if you cut both sides of the purfling"*; *"This is what they call a heads up for beginners."* It is about the gouge in the fluting step. It does not speak to cutting the two channel walls with a paired cutter, or to corner mitres. The post itself, by Jonathan Hai about Yonatan Hai's training "back at the Stradivari School in Cremona," says "it took them many many trials and errors to get all these." Both are blog- and comment-level practitioner accounts.

**A trade-press account of a design-specific mistake pattern.** *The Strad*, "7 tips for perfecting purfling" (a compilation dated 11 Dec 2015; the Hinsberger excerpt is credited to March 2012; [thestrad.com/7-tips-for-perfecting-purfling/158.article](https://thestrad.com/7-tips-for-perfecting-purfling/158.article), read 2026-10-16), quotes maker Ulrich Hinsberger: *"A very well-executed cut made with a double cutter can look too good, owing to its uniform width"*; and *"it is easy to make mistakes on the front, where the rings are parallel."* He prefers a single cutter for a more organic look and finer control of the distance between the inner and outer lines, and says a single cutter lets a mistake be avoided when cutting round the second time (paraphrased from the page).

**Access gap, unchanged.** Maestronet, Delcamp, MIMF and Mandolin Cafe were inaccessible to direct fetch in earlier runs; relevantly titled threads ("Binding and Purfling, by hand," "Purfling cutter.," "Purfling marker or cutter?," "Purfling or Gramil tool") are named but carried at snippet confidence only. Reddit r/luthier was searched with nothing found. The member-gated *Guitarmaker* article "Tools for Making Tools" (Bill Sterling, Issue 131) could not be read. luthiers.com was not checked.

## Proof of existence

**Museum record (read this pass).** Museo del Violino, Cremona, object MS680, "Purfling cutter with adjustable blade," walnut and metal, with the creator and attribution fields as quoted in Lineage — [object page](https://artsandculture.google.com/asset/purfling-cutter-with-adjustable-blade-antonio-stradivari/FgHDmuYtGioEpQ?hl=en); [collection story](https://artsandculture.google.com/story/antonio-stradivari-museo-del-violino/3AXRy3cqgrYpJw?hl=en). The dual-lot explanation and the Ceruti donation come from the story page; the object page does not itself state the lot.

**Manufacturer records.** [StewMac Ibex](https://www.stewmac.com/luthier-tools-and-supplies/types-of-tools/chisels-and-knives/ibex-purfling-cutter/) (read this pass). Dictum 702522 and 717110, the Dictum company history, cremonatools.com and Diefenbacher were recorded by Run 653 and not re-read here; the reviewer's catalogue check supports the 702522 description only.

**Search results with their scope, not proof of nonexistence.**
- No relevant patent was found in the Google Patents (Run 531) and DATAMP (Run 653) searches described.
- No pre-20th-century commercial manufacturer of a dedicated purfling cutter was found. The only catalogue check was Edward Preston & Sons' 1825–1932 English toolmaking catalogue history; the reviewer calls this too narrow to support a general negative, so this is a **named search gap**: other catalogues and manufacturers were not searched.
- No object record was found in the searches performed at the Smithsonian NMAH, the Metropolitan Museum of Art, the Ashmolean, MIM Brussels or the Musée de la Musique (Paris); this repeats a recurring blind spot for small luthiery hand tools across English-language museum search interfaces, not a finding that no holding exists.
- Whether Irving Sloane personally designed the purfling cutter, independent of retailer copy, is not corroborated by the obituary's tool-design list.
- **Continuity.** The record documents continued use of this class of tool at two bounded points, a museum object associated with a Ceruti-workshop collection and current commercial production and practice, with the chain between them incomplete. It does not demonstrate an unbroken tradition.

## References

| Title | Author/Source | URL | Kind | Notes |
|---|---|---|---|---|
| "Scratch Stock" | this corpus, [[the reviewer Processed Originals/Scratch Stock\|Scratch Stock]] | — | corpus cross-reference | naming-collision section |
| "Violin Maker's Plane" | this corpus, [[Violin Maker's Plane]] | — | corpus cross-reference | Sloane obituary source, Preston & Sons history |
| Ibex Purfling Cutter | StewMac | https://www.stewmac.com/luthier-tools-and-supplies/types-of-tools/chisels-and-knives/ibex-purfling-cutter/ | retailer, read 2026-10-16 | blades, .085", 0"–1/4", single-knife use, Sloane attribution |
| StewMac fiddle-kit instructions | StewMac | https://www.stewmac.com/globalassets/video-and-ideas/online-resources/building-instruments/fiddle-kit-instructions/download-fiddle-kit-instructions | maker instructions | named by the reviewer (light progressive cutting; separate knife/micro-chisel at corners); not read this pass `[manual, relayed]` |
| LMI Binding Router Bit and Bearing Sets | StewMac | https://www.stewmac.com/luthier-tools-and-supplies/types-of-tools/routers-and-bits/bits/lmi-binding-router-bit-and-bearing-sets/ | retailer | named by the reviewer as router-based alternative; not read this pass |
| Purfling Groove Marker | Diefenbacher Tools | https://diefenbacher.com/product/purfling-groove-marker/ | retailer | same Ibex object; carried |
| Purfling Channel Cutter | Cremona Tools (Herdim) | https://www.cremonatools.com/purfling-channel-cutter.html | retailer | carried |
| Purfling Cutter, 717110 | Dictum | https://www.dictum.com/en/purfling-cutter/717110 | manufacturer/retailer | not readable this pass; spacing figure `[manual, relayed]`, uncorroborated by the reviewer |
| Purfling Channel Cutter, 702522 | Dictum | https://www.dictum.com/en/purfling-channel-cutter/702522 | manufacturer/retailer | not readable this pass |
| DICTUM Musical Instrument Making Catalogue | Dictum | https://www.dictum.com/media/pdf/Kataloge/DICTUM_Musical-Instrument-Making-Catalogue.pdf | catalogue | named by the reviewer: 0.6 mm HSS blades confirmed; 2.5–12 mm not corroborated; not read this pass `[manual, relayed]` |
| "Company History" | Dictum | https://www.dictum.com/en/company/company-history/ | manufacturer history | carried |
| Object MS680 | Museo del Violino, via Google Arts & Culture | https://artsandculture.google.com/asset/purfling-cutter-with-adjustable-blade-antonio-stradivari/FgHDmuYtGioEpQ?hl=en | museum record, read 2026-10-16 | creator and attribution fields, material, dimensions |
| "Antonio Stradivari" collection story | Museo del Violino, via Google Arts & Culture | https://artsandculture.google.com/story/antonio-stradivari-museo-del-violino/3AXRy3cqgrYpJw?hl=en | museum record, read 2026-10-16 | two-lot structure; Fiorini 1930, Cerani 1893 |
| Musical Instruments Collection | Ashmolean Museum | https://www.ashmolean.org/node/190501 | museum, read 2026-10-16 | earliest dated violin, Andrea Amati, 1564; no purfling detail |
| Violin Making Manual PDF | manuallib.com | https://www.manuallib.com/download/2023-10-17/Violin%20making%20manual.pdf | manual | named by the reviewer; not read this pass `[manual, relayed]` |
| "Marking and cutting the purfling channel" | Vojtech Blahout | http://www.makingtheviolin.com/Marking%20and%20cutting%20the%20purfling%20channel | practitioner site, read 2026-10-16 | tools, 2 mm/1 mm context, grain and corner warnings |
| "Purfling cutter" thread, Dec 2010 | George Wilson, Christophe Mineau, Randy Walton et al., Sawmill Creek | https://www.sawmillcreek.org/threads/purfling-cutter.155827/ | forum, carried | practitioner opinion |
| "Purfling and inlay marker" | Christopher Martyn (Brian Hart's tool) | https://finelystrung.com/2011/04/08/purfling-and-inlay-marker | blog, carried | handle placement |
| "7 tips for perfecting purfling" (compilation, 11 Dec 2015; Hinsberger excerpt credited March 2012) | The Strad (Ulrich Hinsberger) | https://thestrad.com/7-tips-for-perfecting-purfling/158.article | trade press, read 2026-10-16 | double-cutter "too good" uniform width; parallel-ring mistakes; single-cutter preference |
| "Violin Maker's Wife: Purfling Part II" (22 Apr 2012), with comments | Jonathan Hai; comments by Luis Claudio Manfio (reproducing Roger Hargrave's descriptions) and John Cadd | https://www.violinist.com/blog/yonhai/20124/13415 | blog and comments, read 2026-10-16 | Hargrave's del Gesù flaws (Violins 1, 3, 4); Cadd's comment on gouge direction when fluting after the purfling is in; "trials and errors" |
| Stradivari tool photo survey | Kevin Lee | https://www.kevinleeluthier.com/stradivari_tools/StradivariusTools.htm | practitioner site; exact page from the reviewer's CX-415, not re-read here | no labeled purfling cutter |
| "Purfling" | Wikipedia, citing Toby Faber | en.wikipedia.org/wiki/Purfling | tertiary | 1564 Amati purfling construction claim; provisional |
| Working Safely with Sharp Blades or Edges | CCOHS | https://www.ccohs.ca/oshanswers/safety_haz/sharp_blades.html | safety body, read 2026-10-16 | laceration/puncture hazard and controls |
| Hand knives | HSE (UK) | https://www.hse.gov.uk/textiles/hand-knives.htm | safety body, read 2026-10-16 | slip mechanism, storage, training, gloves |
| Roger Sadowsky obituary of Irving Sloane, *American Lutherie* #55 | Guild of American Luthiers | — (cited in Violin Maker's Plane) | obituary | does not name the purfling cutter |

## The reviewer's corrections (8)

- `UNGRADED` — 1. **Correct the mechanism throughout.** Replace “fully cuts the channel in one pass,” “full-width purfling channel in one pass,” and equivalent wording. Two narrow knives establish or deepen the channel walls; they do not excavate the intervening wood. The entry's own three-step workflow and the Making the Violin manual both make this explicit: the cutter first marks, a knife deepens, and a pick removes the waste. A particular double-blade tool may cut both boundaries in one pass, but that is not the same as producing an empty channel
- `UNGRADED` — 2. **Rewrite the core definition as a family definition.** Do not make twin removable blades universal when the entry's historical example is catalogued with a singular adjustable blade and living products include one- and two-knife arrangements. Define the common mechanism as an edge-registering fence plus one or two adjustable knives; then describe the Ibex twin-knife configuration as a prominent modern subtype
- `UNGRADED` — 3. **Replace the safety conclusion.** “No injury account was located” is a research result, not a risk assessment. Exposed, removable, very sharp knives create a foreseeable laceration/puncture hazard during cutting, adjustment, sharpening, transport, and storage. Add controls: secure and support the plate, keep the free hand outside the blade path, arrange the stroke away from the body where the geometry permits, use light progressive passes rather than excess force, stop before repositioning or checking, cover or box the blades in storage, and handle blade changes deliberately. Distinguish personal injury risk from the separate high-cost workpiece-damage risk
- `UNGRADED` — 4. **Make setup operational.** State that knife spacing must be matched to the actual purfling or binding, fence offset to the planned edge margin, and projection to the plate thickness and the maker's sequence. Require a test cut on comparable scrap or a sacrificial setup piece before touching the plate. The .085-inch width and 0–1/4-inch offset belong to one Ibex product, not to the tool family
- `UNGRADED` — 5. **Resolve the stage contradiction.** The entry says both that a slip ruins a plate “already carved out” and that the tool suits work before final carving/graduation. Different making methods put purfling before or after final edge fluting/channel work. Match to a prepared plate edge with a stable reference surface, and direct users to the chosen construction sequence rather than promising “any project stage.”
- `UNGRADED` — 6. **Downgrade absolute negative claims.** Change “No patent exists” to “No relevant patent was found in the searches described.” Apply the same discipline to trademarks, pre-20th-century catalogues, and museum holdings. A search cannot establish universal nonexistence, and DATAMP was explicitly not searched
- `UNGRADED` — 7. **Remove or support the continuity claim.** One 19th-century museum object plus modern products does not demonstrate an “unbroken craft tradition.” Say that historical and current examples document continued use across at least those periods, while the chain between them remains incomplete
- `UNGRADED` — 8. **Use exact source URLs.** The References table's domain-only entries are not auditable citations. Link the exact product, catalogue page or PDF, museum object, collection story, manual, practitioner article, and forum thread. If the exact MS680 page cannot be recovered, keep the claim provisional rather than presenting all fields as independently verified